R
EN
CT
®
MP3/WMA/AAC CD Receiver with Bluetooth
CDE-103EBT
MP3/WMA/AAC CD Receiver
CDE-102E/CDE-101E/
CDE-101EM
• OWNER’S MANUAL
Please read before using this equipment.
• 用戶手冊
請在使用本設備之前先閱讀用戶手冊。
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
Phone 03-8787-1200
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
DAESUNG ELTEC CO., LTD.
Phone 031-711-1731
Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)
68-09359Z76-B
BLUETOOTH (CDE-103EBT only)
iPhone/iPod (Optional)
Setup Before Using ......................................... 18
About Bluetooth .......................................... 18
Before Using Hands-Free Function ............ 18
How to connect to a Bluetooth compatible
device (Pairing) ........................................ 18
Playback ..........................................................23
Searching for a desired Song ..........................23
Quick Search ...................................................23
Direct Search Function ....................................24
Select Playlist/Artist/Album/
Genre/Composer ..........................................24
Bluetooth SETUP ........................................... 18
Bluetooth Setup Operation .......................... 18
Setting the Bluetooth Device ...........................19
Setting the Search Mode ..................................19
Setting the Received Calls automatically
(Auto Answer) ..............................................19
Deleting a Bluetooth Device from the list .......19
Displaying the phone service provider
name .............................................................19
Adjusting the volume for the microphone
input .............................................................19
Selecting the output speaker ............................19
Displaying the firmware version ......................19
Updating the firmware .....................................19
Random Play Shuffle (M.I.X.) ........................24
Repeat Play .....................................................25
Displaying the Text .........................................25
Information
In Case of Difficulty ........................................26
Specifications ..................................................29
Installation and Connections
Hands-Free Phone Control ............................. 20
About the Hands-Free Phone ...................... 20
Answering a Call ......................................... 20
Hanging up the Telephone ........................... 20
Redial Function ........................................... 20
Warning ...................................................30
Caution ...................................................30
Precautions ............................................30
Installation .......................................................31
Calling ......................................................... 20
Redialing a Number In Outgoing History ........20
Dialing a Number In Incoming History ...........20
Dialing a Number In Incoming Missed Call
History ..........................................................20
Dialing a Number In The Phone Book ............21
Mounting the Microphone
(CDE-103EBT only) ....................................31
Connections .....................................................32
Voice Dial Operation ...................................... 21
Adjusting the volume when receiving
a Call ........................................................... 21
Call Switching Operation ............................... 21
USB memory (Optional)
Controlling USB memory (Optional) ............. 21
Playing MP3/WMA/AAC Files with the USB
memory (Optional) ...................................... 21
USB Memory Connection (Optional) ............. 22
About MP3/WMA/AAC File of
USB Memory .............................................. 22
2-EN
Operating Instructions
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
WARNING
Doing so may result in personal injury or damage to the product.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
PRECAUTIONS
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Product Cleaning
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
result in fire, etc.
a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
3-EN
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Make sure this unit will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
INCORRECT
CORRECT
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
New Discs
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Centre Hole
Centre Hole
New Disc
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Outside
(Bumps)
Bumps
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
4-EN
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.
is lost while using this product.
On Handling USB Memory
To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
Fix the USB memory in a location where driver operation will
not be hindered.
•
•
•
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalised).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
•
•
•
USB memory may not function correctly at high or low temperature.
The USB flash memory supports only 512 or 2,048 bytes per
sector.
About media that can be played
Use only compact discs with the label side showing the CD logo
•
•
•
Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or state.
USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.
Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
marks below.
•
•
A file that is copy-protected (copyright protection) cannot be
played back.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-
ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
The unit can play back “mp3”, “wma” or “m4a” file extensions.
Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognised. The resulting playback
may contain noise that can damage speakers and/or amplifiers.
It is recommended to back up important data on a personal computer.
Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
•
•
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
Use discs with MP3/WMA/AAC files written in a format
compatible with this unit. For details, see pages 10-11.
ROM data other than audio files contained in a disc will not
produce sound when played back.
•
•
•
•
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
•
•
•
•
iPhone is a trademark of Apple Inc.
“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has
been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is
under licence. Other trademarks and trade names are those of
their respective owners.
Protecting the USB connection terminal
•
Only a USB memory can be connected to the USB connection
terminal on this unit. Correct performance using other USB
products cannot be guaranteed. A USB hub is not supported.
Do not connect a USB memory over 20 mm wide. Also, avoid
connecting USB memory and Front Aux at the same time.
If a USB device is inserted in the unit, it projects out and may be
a danger while driving. Use a commercially available USB
extension cable, and connect it in a safe way.
•
•
•
•
•
•
•
•
Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
The audio file format that can be played back on the unit is
MP3/WMA/AAC.
Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
•
•
“MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
“Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
5-EN
Attaching
Getting Started
1
2
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Rotary encoder
Push the left side of the front panel until it locks
firmly into the main unit.
SOUND/SETUP
SOURCE/
(Release)
/MUTE
/
/ENT
•
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
* This illustrator is CDE-103EBT.
Accessory List
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
•
•
•
•
•
•
•
•
Head unit ............................................................................1
Power cable........................................................................1
Microphone (4m) (CDE-103EBT only)..............................1
Mounting sleeve.................................................................1
Carrying case.....................................................................1
Bracket key.........................................................................2
Screw (M5 × 8)....................................................................4
Owner’s Manual .......................................................... 1 set
1
2
3
Turn off the unit power.
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar pointed
object.
Turning Power On and Off
Press SOURCE/ to turn on the unit.
•
The unit can be turned on by pressing any other button except
(Release).
and
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
RESET switch
•
The first time power is turned on, the volume will start from level 12.
Adjusting Volume
Detaching and Attaching the Front Panel
Turn the Rotary encoder until the desired sound is
obtained.
Detaching
1
2
Turn off the unit power.
Lowering Volume Quickly
Press
(Release) at the lower left side until the
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
Press
/MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
/MUTE again will bring the audio back to its
previous level.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
•
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
6-EN
Setting Time
Radio
1
2
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
SOURCE/
BAND
Turn the Rotary encoder to select the CLOCK ADJ
mode, and then press
/
/ENT.
The time indication will blink.
3
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
4
5
When the hour has been adjusted, press
/
/ENT.
TUNE/A.ME
Preset buttons
(1 through 6)
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
* This illustrator is CDE-103EBT.
6
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
Listening to Radio
•
To synchronise the clock to another clock/watch or radio time
announcement, press and hold
/
/ENT for at least 2 seconds
after setting the “hour.” Minutes will reset to “00”. If the display
shows over “30” minutes when you do this, the time will advance one
hour.
1
2
Press SOURCE/ to select TUNER mode.
Press BAND repeatedly until the desired radio band
is displayed.
•
•
Pressing
/MUTE will return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
Controllable with Remote Control
This unit can be controlled with an optional Alpine
DX SEEK (Distance mode)
SEEK (Local mode)
remote control. For details, consult your Alpine dealer.
OFF (Manual mode)
DX SEEK
Point the optional remote control transmitter at the
remote-control sensor.
•
The initial mode is Distance mode.
Remote control sensor
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
Holding down
continuously.
or
to tune in the desired station.
or
will change the frequency
Presetting Stations Manually
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•
•
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
7-EN
Presetting Stations Automatically
CD/MP3/WMA/AAC
1
2
Press BAND repeatedly until the desired radio band
is displayed.
SOURCE/
Rotary encoder
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
1
2
VIEW
/MUTE
4 5
•
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
/
/ENT
/ESC
* This illustrator is CDE-103EBT.
Tuning to Preset Stations
Playback
1
2
Press BAND repeatedly until the desired band is
displayed.
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
” indicator lights up .
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
“
The display shows the band, preset number and frequency
of the station selected.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
The mode will change every time the button is pressed.
1
2
TUNER
DISC
USB AUDIO
iPod* /AUX+*
3
4
BT AUDIO*
AUX*
TUNER
1
* Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 17).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT
3
ADAPTER. Refer to “Bluetooth Setting” (page 16).
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/
4
CDE-102E only)” (page 15).
2
While playing back MP3/WMA/AAC, press 1
2 to select the desired folder.
or
Pressing and holding 1
or
2 will change folders
continuously.
8-EN
CD mode :
3
Press
or
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
: Only a track is repeatedly played back.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
MP3/WMA/AAC mode :
Press
.
Fast forward:
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
Press and hold
.
4
To pause playback, press
Pressing /ENT again will resume playback.
/
/ENT.
/
5
•
To eject the disc, press
.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
M.I.X. (Random Play)
•
•
•
•
If the CD does not eject, press and hold
for at least 2 seconds.
The “
” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs cannot be used.
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
•
To cancel M.I.X. play, press 5
again.
CD mode :
•
•
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
: The tracks are played back in random sequence.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
F101 T103
: The files are played back in random sequence.
Folder number File number
display
display
•
Press VIEW to switch the display. See “Displaying the Text”
(page 14) for information about display switching.
* In the USB mode, all files stored in the USB memory are played back
in random sequence, and the “
” indicator lights up.
Repeat Play
Press
4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press
4 again and select off to deactivate repeat play.
9-EN
Searching for CD Text
Quick Search
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
You can search for tracks (files).
1
Press and hold
CD/MP3/WMA/AAC mode to activate Quick Search
/ESC for at least 2 seconds in the
1
2
Press
/ESC during play.
mode.
This will set the search mode, and the “
up.
” indicator lights
The “ ” indicator lights up.
2
Turn the Rotary encoder to select a desired track
(file).
The selected track is played back immediately.
Turn the Rotary encoder to select the desired
track, and then press /ENT.
This will play the selected track.
/
•
Press and hold
/ESC for at least 2 seconds in the search mode to
•
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
About MP3/WMA/AAC
File/Folder Name Search
(concerning MP3/WMA/AAC)
CAUTION
Except for private use, duplicating audio data (including
MP3/WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
Folder and file names may be searched and displayed during playback.
1
2
During MP3/WMA/AAC playback, press
activate the search mode.
The “ ” indicator lights up.
/ESC to
What is MP3?
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, and then
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
press
/
/ENT.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realises such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
Folder Name Search mode
3
Turn the Rotary encoder to select the desired
folder.
4
Press and hold
play back the first file in the selected folder.
/
/ENT for at least 2 seconds to
What is WMA?
•
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
•
•
To search for files in the Folder Name Search mode, press
/
/ENT. Files in the folder may be searched.
What is AAC?
Press
/MUTE to exit Folder Name Search mode in step 3 in order
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
to select File Name Search mode.
The root folder is displayed as “
•
•
”.
When Folder Name Search is made during M.I.X. play, the M.I.X.
play mode will be cancelled.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
File Name Search mode
MP3/WMA/AAC files that are playable on this device have the
file extensions “mp3” / “wma” / “m4a.” Files with no extension
cannot be played back (WMA ver. 7.1, 8 and 9 are supported).
Protected files are not supported, neither are raw AAC files
(using the “.aac” extension).
3
4
Press 1
or
2 to select another Folder.
Select the desired file by turning the Rotary
encoder.
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
5
•
Press
/
/ENT to play back the selected file.
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
Playback of AAC files encoded by iTunes is supported.
•
•
Press
/MUTE in the search mode to return to the previous mode.
When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
10-EN
Supported playback sampling rates and bit rates
Order of files
Files are played back in the order that the writing software writes
MP3
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
48 - 192 kbps
Root folder
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
If information contains characters other than ID3 tag information,
the audio file may not be played back.
The tag information may not be correctly displayed, depending
on the contents.
Folder
MP3/WMA/AAC File
* The folder No./ folder Name will not be displayed if no file is
contained in the folder.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or
CD-RW using CD-R writing software. A disc can hold up to 510
files/folders (including Root Folders), and the maximum number
of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
11-EN
Setting the Bass Control
Sound Setting
You can change the Bass Frequency emphasis to create your own tonal
preference.
Rotary encoder (AUDIO/LOUD)
SOURCE/
BAND
1
Press SOUND/SETUP repeatedly to select the
BASS mode.
BASS
TREBLE
HPF
BASS
Setting the Bass Centre Frequency
2-1 Press BAND to select the desired bass centre
frequency.
/ESC
SOUND/SETUP
80 Hz
100 Hz
200 Hz
60 Hz
80 Hz
* This illustrator is CDE-103EBT.
Emphasises the displayed bass frequency ranges.
Setting the Bass Bandwidth
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
2-2 Press SOURCE/ to select the desired bass
bandwidth.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
Each press changes the mode as follows:
SUBWOOFER*
BASS LEVEL
VOLUME
TRE LEVEL
BALANCE
FADER DEFEAT
SUBWOOFER
Subwoofer : +0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Setting the Bass Level
1
2-3* Turn the Rotary encoder to select the desired
bass level (–7~+7).
You can emphasise or weaken the bass level.
Volume : 0 ~ 35
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
If no operation is performed for 5 seconds after selecting the
SUBWOOFER, BASS LEVEL, TRE LEVEL, BALANCE, FADER or
DEFEAT mode, the unit automatically returns to normal mode.
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of
BASS LEVEL and TRE LEVEL will return to the factory
defaults.
•
The function is inoperable when DEFEAT is set to ON.
1
* The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
12-EN
Setting the Treble Control
Turning Loudness On/Off
You can change the Treble Frequency emphasis to create your own tonal
preference.
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
1
Press SOUND/SETUP repeatedly to select the
TREBLE mode.
Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
BASS
TREBLE
HPF
BASS
•
The function is inoperable when DEFEAT is set to ON.
Setting the Treble Centre Frequency
2-1 Press BAND to select the desired treble centre
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasises the displayed treble frequency ranges.
Setting the Treble Level
2
2-2* Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasise the treble level.
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
•
The function is inoperable when DEFEAT is set to ON.
2
* The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
Press SOUND/SETUP repeatedly to select the HPF
mode.
BASS
TREBLE
HPF
BASS
2
Turn the Rotary encoder to select the desired HPF
frequency.
OFF
60 Hz
80 Hz
100 Hz
All frequencies above the selected cutoff are output.
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The function is inoperable when DEFEAT is set to ON.
13-EN
About the indication display
When displaying Text, the following indicators are lit
according to the mode.
Other Functions
Indicator/
Mode
MP3/WMA/AAC/
USB AUDIO
Mode
SOURCE/
iPhone/iPod/BT
AUDIO* Mode
CD Mode
4
2
Folder Name*
––
––
––
being displayed
1
1
Artist Name*
Artist Name*
being displayed being displayed
VIEW
1
1
Text (Disc
Album Name* Album Name*
* This illustrator is CDE-103EBT.
3
Name* ) being being displayed being displayed
displayed
1
1
Displaying the Text
Text (Track
Song Name* / Song Name*
Name* ) being File Name being being displayed
displayed displayed
3
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
1
* Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
* The root folder of disc is displayed as “FOLDER”. The root folder of
USB memory is displayed as “ROOT”.
2
Press VIEW.
The display will change every time the button is pressed.
3
* If there is no Text (Disc Name or Track Name), “DISC TEXT”/
•
When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
“TRACK TEXT” is displayed.
* CDE-102E/CDE-101E/CDE-101EM only.
4
About “Text”
The display in Radio mode:
FREQUENCY CLOCK
Text:
FREQUENCY
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
TEXT (TRACK NAME)*
1
1
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
“NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
The text or tag information may not be correctly displayed,
depending on the contents.
TEXT (DISC NAME)*
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME
FOLDER NO./FILE NO.
FILE NO./CLOCK
FOLDER NAME
FILE NAME
SONG NAME*
2
2
2
ARTIST NAME*
ALBUM NAME*
FILE NO./ELAPSED TIME
The display in AUX mode (CDE-103EBT/CDE-102E only):
AUX NAME AUX NAME/CLOCK AUX NAME
Displaying Time
Press VIEW repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 14).
The display in BT AUDIO mode (CDE-102E/CDE-101E/CDE-101EM
only):
The Following display will be shown only when a telephone or
Bluetooth Streaming device with Metadata capabilities is
correctly connected with a Bluetooth INTERFACE (KCE-400BT).
(Alpine KCE-400BT) (Sold Separately). (For details on Bluetooth
INTERFACE, refer to the Owner’s Manual of KCE-400BT).
•
Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
2
BT A/ELAPSED TIME
BT A/CLOCK
ARTIST NAME*
2
2
ALBUM NAME*
SONG NAME*
BT A/ELAPSED TIME
1
* Displayed during playback of a disc with CD text.
2
* ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
14-EN
Using the Front AUX Input Terminal
(CDE-103EBT/CDE-102E only)
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
SOURCE/
Press SOURCE/ , and select the AUX mode to listen to
the portable device.
Rotary encoder (AUDIO) SOUND/SETUP
1
2
TUNER
BT AUDIO*
DISC
USB AUDIO
iPod* /AUX+*
3
AUX TUNER
1
* Displayed only when the iPhone/iPod is connected and
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 17).
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
2
/
/ENT
/MUTE
the AUX+ SETUP Mode” (page 17).
3
* CDE-102E/CDE-101E/CDE-101EM only. Displayed only when BT
IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16).
* This illustrator is CDE-103EBT.
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Portable player, etc.
Main unit
1
2
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
Turn the Rotary encoder to select the desired
SETUP menu, and then press
(e.g. Select SUBWOOFER)
/
/ENT.
1
2
3
BT IN*
CLOCK ADJ*
PLAY MODE
INT MUTE*
4
5
AUX+ SETUP
POWER IC
ILLUMINATI*
AUX+ NAME*
DEMO SUBWOOFER
DIMMER*
AUX NAME*
SUBW SYS*
SCROLLTYPE TEXT SCR
or
6
7
8
BT IN
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs)
1
* Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
* Refer to “Setting Time” (page 7).
* Displayed only when BT IN is OFF.
* Displayed only when AUX+ SETUP is ON.
* CDE-103EBT/CDE-102E only.
* Displayed only when SUBWOOFER is ON.
* CDE-103EBT only.
* CDE-103EBT/CDE-102E/CDE-101E only.
2
3
4
5
6
7
8
3
4
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
•
•
Press
/MUTE to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
15-EN
Scroll Type Setting
SCR TYPE1 / SCR TYPE2 (Initial setting)
Bluetooth Setting
Choose from two scrolling methods.
Select the type you prefer.
Setting the Bluetooth Connection (BT IN)
BT ADAPTER / BT OFF (Initial setting)
SCR TYPE1:
The characters scroll from right to left, a
single character at a time.
With Bluetooth technology, you can place a hands-free call by a
Bluetooth-equipped mobile phone.
SCR TYPE2:
Words are built up from left to right, a single
character at a time. When the display is filled,
it is cleared and the remaining words are
displayed the same way until all words of the
title have been shown.
CDE-102E/CDE-101E/CDE-101EM:
If an optional Buletooth INTERFACE (KCE-400BT) is connected,
make this setting when the Bluetooth function is used. For
details, refer to the Owner’s Manual of the optional Bluetooth
INTERFACE (KCE-400BT). Set ADAPTER when the Bluetooth
INTERFACE (KCE-400BT) is connected.
Scroll Setting (TEXT SCR)
SCR AUTO / SCR MANU (Initial setting)
•
•
The
button can be used only when the optional Bluetooth
INTERFACE (KCE-400BT) is connected.
If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names and tags.
CDE-103EBT:
Set ADAPTER when the Bluetooth function is used. For details
SCR AUTO:
The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
The display is scrolled when a disc is loaded
or when a track is changed, etc.
on the set up procedure, refer to “Bluetooth SETUP” on page 18.
Sound Customizing
SCR MANU:
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
•
The unit scrolls CD text names, folder names, file names or tag
display.
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
1 In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
This unit has a demonstration feature for the display.
SUBWOOFER
FADER
BASS LEVEL
DEFEAT VOLUME
TRE LEVEL
BALANCE
•
To quit Demo mode, set to DEMO OFF.
SUBWOOFER
2 Adjust the level by turning the Rotary encoder.
MP3/WMA/AAC
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Playing MP3/WMA/AAC Data (PLAY MODE)
CD-DA (Initial setting) / CDDA/MP3
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
Changing Lighting Colour (CDE-103EBT only)
multi-session discs can be played back.
ILUM TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4
•
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
You can change the lighting colour of the following four buttons.
SOURCE/ , BAND,
,
.
TYPE1 :
TYPE2 :
TYPE3 :
TYPE4 :
When the colour of the four buttons is blue,
the colour of the other is red.
When the colour of the four buttons is green,
the colour of the other is green.
When the colour of the four buttons is amber,
the colour of the other is red.
When the colour of the four buttons is red,
the colour of the other is red.
External Device
Turning Mute Mode On/Off (INT MUTE)
MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Dimmer Control (CDE-103EBT/CDE-102E/CDE-101E only)
DIM AUTO (Initial setting) / DIM MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
•
The function is inoperable when the ILLUMINATI is set to other than
TYPE1 for CDE-103EBT, refer to “Changing Lighting Colour
(CDE-103EBT only)” on page 16.
16-EN
Connecting to an External Amplifier (POWER IC)
Setting the AUX+ SETUP Mode
POW ON (Initial setting) / POW OFF
AUX+ ON / AUX+ OFF (Initial setting)
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
POW OFF:
Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and cannot drive speakers.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
CDE-103EBT/CDE-102E:
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/ is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
Front
left
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
Amplifier
Amplifier
You can change the AUX+ name display when AUX+ SETUP is set to
Front
right
ON. Press
/
/ENT when AUX+ SETUP is set to ON, and select
/ENT.
AUX+ NAME by turning the Rotary encoder, then press
/
Rear
left
After that, turn the Rotary encoder to select the desired AUX+ name.
Rear
right
Setting the AUX NAME mode (CDE-103EBT/CDE-102E
only)
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE* / GAME
1
2
CDE-101E/CDE-101EM:
You can change the AUX NAME display in the SETUP mode.
Front
left
1
*
*
After the setting is completed, AUX is displayed on the unit.
After the setting is completed, PMD is displayed on the unit.
2
Amplifier
Front
right
POW ON :
The speakers are driven by the built-in
amplifier.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
•
No sound is produced by the system when the power output is set to
OFF.
17-EN
How to connect to a Bluetooth compatible
device (Pairing)
BLUETOOTH
For details on the control from a Bluetooth compatible device, refer to
the Owner’s Manual of the Bluetooth compatible device.
(CDE-103EBT only)
1
2
Set a Bluetooth connection from a Bluetooth
compatible device.
Rotary encoder
SOUND/SETUP
/VOICE DIAL
The PIN code (“0000”) is displayed on the connected
unit.
•
The PIN code is fixed as “0000.”
3
Input the PIN code (“0000”) in a Bluetooth
compatible device.
4
If this unit is successfully connected to a Bluetooth
compatible device, “CONNECTED” is displayed, and
then the unit returns to normal mode.
1
2
/MUTE/
/
/ENT
•
The registration number 5 is the guest mode. Content that is
registered as the guest mode is deleted when you set ignition from
ACC to OFF. If all the 5 positions (including guest mode) have been
registered, you cannot register the 6th device. To register another
device, you need to delete one of the device from position1 to 5 first.
If a Bluetooth compatible device is successfully connected, the next
time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
* This illustrator is CDE-103EBT.P
Setup Before Using
•
•
About Bluetooth
Bluetooth is a wireless technology allowing communication between a
mobile device or personal computer over short distances. This enables a
hands-free call or data transmission between Bluetooth compatible
devices.
Set “Setting the Search Mode” (page 19) to VISI M ON to enable this
unit to recognise a mobile phone. For mobile phone passkey
(passcode) input operation, refer to the mobile’s Owner’s Manual.
•
•
Depending on the Bluetooth version, a Bluetooth compatible device
may not be able to communicate with this unit.
Proper function of this unit with all Bluetooth compatible devices is
not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
Depending on the surroundings, Bluetooth wireless connection may
be unstable.
When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
Bluetooth SETUP
Bluetooth Setup Operation
•
•
•
The following steps 1 to 4 are common to the various Bluetooth
functions. For details, refer to each individual function.
Depending on the connected Bluetooth compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
•
•
While calling, Bluetooth Setup operation cannot be performed.
Set “BT IN” to BT ADAPTER, and then perform Bluetooth SETUP
operation.
1
2
Press and hold SOUND/SETUP for at least 2
seconds to activate the SETUP mode.
Before Using Hands-Free Function
Before using the hands-free phone/audio function, the following
settings need to be made.
Turn the Rotary encoder to select the desired
items and then press
/
/ENT.
1
Be sure to set “INT MUTE” to OFF. Refer to the
SETUP function on page 15.
BT IN PAIRED DEV*
VISIBLE M*
AUTO ANS*
CLEAR DEV*
SPEAKER SL*
SEV NAME* MIC INPUT*
FW VERSION* FW UPDATE*
•
To enable sound pass-through of the Bluetooth compatible device,
make sure that INT MUTE is turned OFF (Initial setting on the unit
is OFF).
* When “BT IN” is set to BT ADAPTER, the above items are
displayed.
2
Set “BT IN” to BT ADAPTER (page 16).
3
4
Turn the Rotary encoder to change the settings.
•
Before using a hands-free phone, it must be paired with this unit.
Refer to “Bluetooth SETUP” (pages 18-19).
Press and hold SOUND/SETUP for at least
2 seconds.
The SETUP mode is cancelled.
18-EN
Setting the Bluetooth Device
Displaying the phone service provider name
Select one of 5 connected Bluetooth compatible devices that you
previously registered (the fifth registered by guest mode*).
Setting item : SEV NAME
The service provider name of the connected Bluetooth compatible
device will be displayed. If a Bluetooth compatible device is not
connected, “ID UNSENT” will also be displayed.
Setting item: PAIRED DEV
Turn the Rotary encoder to select a Bluetooth
compatible device you want to use (you want to change
•
Depending on the character type some phone service provider name
cannot be displayed.
connection) and then press
/
/ENT
.
•
If the connection is successfully changed, “CONNECTED” is
displayed for 2 seconds and the indicator lights up, then the
display returns to the SETUP screen.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume level.
•
•
If you input the wrong passcode or communications fail, “FAILED”
is displayed.
If you want to connect another Bluetooth compatible device, after
disconnecting the current Bluetooth compatible device, connect the
Bluetooth compatible device you want to change to.
The PIN code is fixed as “0000”.
Setting item : MIC INPUT
Turn the Rotary encoder to select the desired volume level (0~7).
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Selecting the output speaker
* Guest mode:
You can select the connected speaker in car to output the sound signal of
telephone.
Use this mode for a temporary pairing. Registration (in guest mode)
is cancelled once the ignition key goes from ACC to off.
Setting item : SPEAKER SL
Setting the Search Mode
ALL:
F-L:
The sound be output from all of speakers in car.
The sound only be output from the front left
speaker.
You can set whether this unit can be recognised or not from a Bluetooth
compatible device. Normally set this to VISI M ON.
F-R:
The sound only be output from the front right
speaker.
Setting item: VISIBLE M
VISI M ON:
Enable recognition of this unit from the
Bluetooth compatible device.
F-LR:
The sound be output from the front left and front
right speaker.
VISI M OFF: Disable recognition of this unit from the
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Bluetooth compatible device.
•
Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Displaying the firmware version
Setting item : FW VERSION
The current firmware version will be displayed.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically
or not.
Updating the firmware
Setting item: FW UPDATE
Setting item: AUTO ANS
With this setting, the Bluetooth firmware update function can be
activated, but other devices and software may be required. For details,
consult ALPINE website.
AT ANS ON: When a call is received, it will be taken
automatically.
AT ANS OFF: When a call is received, it will not be
received automatically, press
call.
to receive a
•
Even if this setting is set to ON/OFF, the received call setting on the
mobile phone takes priority.
Deleting a Bluetooth Device from the list
You can delete the history of a previously connected Bluetooth
compatible device.
Setting item: CLEAR DEV
1
Turn the Rotary encoder to select the Bluetooth
compatible device to be deleted and then press
/
/ENT.
2
Turn the Rotary encoder to select CLEAR YES if
you want to delete and then press
/
/ENT.
•
Selecting CLEAR NO will cancel the setting.
19-EN
Calling
Hands-Free Phone Control
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Calling.” The following
steps 1 to 5 are common to the various ways of making these calls. For
details, refer to each individual category for making calls.
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
1
2
Press
.
•
Avoid answering a hands-free call in heavy traffic or on narrow or
winding streets.
Close the windows while calling to reduce background noise.
If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
The outgoing method list is displayed.
Turn the Rotary encoder to select the outgoing
mode.
•
•
Setting items
: DIALED / RECEIVED / MISSED /
PHONE BOOK
•
•
•
Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
DIALED
: Dialed history
: Received history
: Missed incoming history
RECEIVED
MISSED
PHONE BOOK : Mobile phonebook
Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
3
Press
/
/ENT.
The outgoing mode is activated, and each mode list is
displayed.
•
It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
4
•
Turn the Rotary encoder to select a name or a
telephone number from the list.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
The names of PHONE BOOK are listed alphabetically with the same
beginning alphabetical character, and can be skipped to the next
alphabetical character by pressing 1
the section beginning with alphabet B from A.
or
2. e.g. Press
2 to
Answering a Call
5
Press /ENT.
/
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
The selected telephone will be called.
If one name has several numbers registered in the telephone
Press
.
book, press /ENT after selecting the name*, then turn the
/
The call starts.
Rotary encoder to choose the desired number and press
/
/
/ENT, the telephone will be called. Press and hold
/ENT for at least 2 seconds after selecting the name, the
•
•
When “Setting the Received Calls automatically (Auto Answer)”
(page 19) is set to AT ANS ON, you can receive a call automatically.
While calling, the source sound on the unit is muted. After calling,
playback will resume.
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognised, default number will be displayed.
•
The names registered in the telephone book are displayed. If the
name is not registered, a number is displayed. If both name and
number cannot be displayed, “ID UNSENT” will be displayed.
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Hanging up the Telephone
Press and hold
for at least 2 seconds.
The call finishes.
•
•
While receiving you can also hang up by pressing and holding
for at least 2 seconds.
Redialing a Number In Outgoing History
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Redial Function
You can redial the person you have previously called.
Setting item: DIALED
After finishing a call “----------” will be displayed, press
within 5 seconds.
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
The telephone is redialed.
•
If you receive a call from an unknown number, you cannot use the
redial function to call back.
Setting item: RECEIVED
Dialing a Number In Incoming Missed Call History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Setting item: MISSED
20-EN
Dialing a Number In The Phone Book
Up to 1,000 telephone numbers are downloadable from a mobile phone.
Dial a call by selecting a person from the phone book list.
USB memory (Optional)
Setting item: PHONE BOOK
•
•
•
If a name cannot be obtained via the phonebook, “
displayed.
The order of the list display depends on the design of the mobile
phone.
If the call history or phonebook of the mobile phone is added or
” is
deleted while it is connected to the unit, the list displayed on the unit
may not be brought up to date. If it is not updated, you cannot
correctly place a call.
/
/ENT
SOURCE/
* This illustrator is CDE-103EBT.
Voice Dial Operation
Controlling USB memory (Optional)
You can call the telephone by performing voice operation.
1
Press and hold /VOICE DIAL for at least
2 seconds.
The speak mode is activated, and “SPEAK” is displayed.
A USB memory device may be connected to this unit. With USB
memory connected, playback of files on the device is controlled from
this unit.
2
Say the telephone number, name you want to call
into the microphone.
•
The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
•
You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, “NO SUPPORT” is displayed for 2 seconds.
The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
•
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
•
•
•
Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “NO CALL” is displayed
for 2 seconds.
If you place a call via voice dial, you cannot display a phone number
or name.
1
Press SOURCE/ to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
1
2
TUNER
DISC
USB AUDIO
iPod* /AUX+*
3
4
BT AUDIO*
AUX*
TUNER
Adjusting the volume when receiving a
Call
1
* Displayed only when the iPhone/iPod is connected and
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 17).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
While calling, you can adjust the volume.
the AUX+ SETUP Mode” (page 17).
3
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT
Turn the Rotary encoder to adjust the volume.
ADAPTER. Refer to “Bluetooth Setting” (page 16).
4
•
You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/
CDE-102E only)” (page 15).
2
To pause playback, press
/
/ENT.
Pressing /ENT again will resume the playback.
/
•
•
•
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
When a search is made in the USB mode, any song being played back
will be stopped.
This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to “CD/MP3/WMA/AAC” on pages 8 to 11.
Before disconnecting USB memory, be sure to change to another
source or set to pause.
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
•
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
While calling, press and hold
/
/ENT for at least
2 seconds to switch the call sound between the unit and
mobile phone.
•
Depending on the mobile phone, this operation may not be
performed.
21-EN
USB Memory Connection (Optional)
iPhone/iPod (Optional)
Connect USB memory
SOURCE/
1
2
Open the cover of the USB connection terminal.
1
4
6
5
2
Rotary encoder
Connect the USB memory directly to the USB
connection terminal, or via the USB cable.
This unit
USB Connection Terminal
USB memory
(Sold Separately)
or
/
VIEW
/
ENT Preset buttons
(1 through 6)
/MUTE
/ESC
Cable (Sold
Separately)
USB memory
(Sold Separately)
* This illustrator is CDE-103EBT.
An iPhone/iPod can be connected to this unit by using the proprietary
™
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold
Remove USB memory
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
1
Carefully, pull out the USB memory from the USB
cable or the USB connection terminal.
•
•
Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer
to “Setting the AUX+ SETUP Mode” on page 17).
If the Bluetooth INTERFACE (KCE-400BT) and an iPhone/iPod are
connected at the same time, be sure to disconnect the iPhone/iPod
from Bluetooth INTERFACE (KCE-400BT) while turning ACC to
OFF (CDE-102E/CDE-101E/CDE-101EM only).
If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, use the unit (CDE-103EBT only)
in which the Bluetooth function is built, or use the Bluetooth
INTERFACE (KCE-400BT) (sold separately) (CDE-102E/
CDE-101E/CDE-101EM only).
Internet and telephone functions of iPod touch or iPhone, etc., can
also be used when connecting to the unit. However, using these
functions will stop or pause the playing songs, at this time do not
operate the unit to avoid a malfunction.
2
Close the cover of the USB connection terminal.
•
Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
•
•
When removing USB memory, pull it out straight.
If sound is not output or USB memory is not recognised even when
USB memory is connected, remove USB memory once, then connect
it again.
•
•
•
Route the USB cable away from other cables, etc.
After removing the USB memory, close the cover of the USB
connection terminal to prevent dust or foreign objects from entering
and causing a malfunction.
•
•
Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
About MP3/WMA/AAC File of USB
Memory
iPhone/iPod models usable with this unit
•
The unit can be used with the following iPhone/iPod models.
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. This unit can recognise at least 100 folders (including
root folder) and 100 files per folder stored in USB memory.
Playback may not be performed if a USB memory exceeds the
limitations described above.
iPhone 3G (version 2.0)
iPhone (version 1.1.4)
iPod touch (version 1.0.4)
iPod classic (version 1.1.1)
iPod nano (3 rd generation) (version 1.1)
iPod nano (2nd generation) (version 1.1.3)
iPod with video (version 1.2.3)
iPod nano (1st generation) ( version 1.3.1)
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back USB memory media.
•
For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device.
•
•
This unit does not support video playback from iPhone/iPod,
even using a video-compatible cable.
If the unit is used with versions of iTunes earlier than 7.6,
correct function and performance are not guaranteed.
22-EN
1
2
Press
The “
/ESC to activate the search selection mode.
” indicator lights up.
Playback
Turn the Rotary encoder to select the ARTIST
search mode, and then press /ENT.
1
Press SOURCE/ to switch to the iPod mode.
/
1
2
TUNER
DISC
USB AUDIO
iPod* /AUX+*
PLAYLIST
GENRE
ARTIST
COMPOSER
ALBUM
SONG
PODCAST
PLAYLIST
3
4
BT AUDIO*
AUX*
TUNER
AUDIOBOOK
1
* Displayed only when the iPhone/iPod is connected and
3
4
Turn the Rotary encoder to select the desired
Artist, and then press /ENT.
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 17).
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT
ADAPTER. Refer to “Bluetooth Setting” (page 16).
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/
CDE-102E only)” (page 15).
/
2
Turn the Rotary encoder to select the desired
Album, and then press /ENT.
3
/
4
5
Turn the Rotary encoder to select the desired
Song, and then press
/
/ENT.
•
After pressing and holding
in each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs of the selected hierarchy are played back.
/
/ENT for at least 2 seconds while
2
Press
or
to select the desired song.
Return to the beginning of the current song:
Press
.
•
•
After selecting [ALL] in the search mode with“*”, press and hold
/
/ENT for at least 2 seconds to play back all songs in the
Fast backward through current song:
Press and hold
iPhone/iPod or selected search mode.
While in the search mode, if you press and hold
.
/ESC for
2 seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
Advance to the beginning of the next song:
Press
.
•
•
•
•
•
•
In the search mode, pressing
mode.
/MUTE will return to the previous
Fast forward through current song:
Press and hold
.
When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
“NO PODCAST” will be displayed if there is no podcast data in the
iPhone/iPod in the PODCAST search mode.
“NOAUDIOBOK” will be displayed if there is no audiobook data in
the iPhone/iPod in the AUDIOBOOK search mode.
If “iPod name” stored in the iPhone/iPod is selected in the desired
3
To pause playback, press
/
/ENT.
Pressing /ENT again will resume playback.
/
•
•
•
A song playing on the iPhone/iPod while it is connected to this unit
will continue to play from where it was paused after disconnection.
If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1
An episode may have several chapters, the chapter can be changed
by pressing or
or
2.
Playlist search mode, and
all songs in the iPhone/iPod. Also, if you press and hold
/
/ENT is pressed, you can search for
/ENT
.
/
for at least 2 seconds, all songs in the iPhone/iPod are played back.
Depending on the iPhone/iPod, podcast search is not supported.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 24.
•
•
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
Quick Search
You can search a song from all songs in the iPhone/iPod without
selecting an album, artist, etc.
Hierarchy 1
Playlist
Hierarchy 2
Song
Hierarchy 3
Hierarchy 4
1
Press and hold
activate the Quick Search mode.
The “ ” indicator lights up.
/ESC for at least 2 seconds to
—
Song
—
—
—
Artist*
Album*
Song
Album*
—
Song
—
—
—
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
Podcast
Genre*
Episode
Artist*
Album*
—
—
—
Album*
Song
—
Song
—
•
Press and hold
/ESC for at least 2 seconds in the search mode to
Composer*
Audiobook
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
—
•
•
If many songs are in the iPhone/iPod, it takes time to search for
songs.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 24.
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
•
This function is inactive during repeat (
) playback.
23-EN
Direct Search Function
Random Play Shuffle (M.I.X.)
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song.
The Shuffle function of the iPhone/iPod is displayed as
unit.
on this
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is
selected randomly. This continues until all albums have been
played.
In the search mode, press any one of the preset
buttons (1 through 6) to quickly skip over a
designated percent of your song content.
Song search example:
Shuffle Songs:
If there are 100 songs in your iPhone/iPod, they are divided into
6 groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
Example 1:
1
Press 5
.
Suppose the song you are searching for is located at around
the middle (50%) of your library: press button 4 to jump to the
50th song and turn the Rotary encoder to find the desired
song.
The songs are played back in random sequence.
(off)
(Shuffle Albums)
(Shuffle Songs)
Example 2:
Suppose the song you are searching for is located near the
end (83%) of your library: press button 6 to jump to the 83rd
song and turn the Rotary encoder to find the desired song.
2
To cancel M.I.X. play, select (off) with the above
procedure.
•
If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle
Albums is selected.
All 100 songs (100%)
0%
1
17%
33%
50%
67%
83%
6
Shuffle ALL:
Preset
buttons
Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one
song does not play back again until all songs have been played
back.
2
3
4
5
First
17th
33rd
50th
67th
83rd
Songs
song song song song song song
1
Press 6.
The songs are played back in random sequence.
Select Playlist/Artist/Album/Genre/
Composer
(off)
(Shuffle ALL)
2
To cancel M.I.X. play, select (off) with the above
procedure.
Playlist/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
•
If Shuffle ALL is selected, the selected songs being played back in the
search mode are cancelled.
Press 1
or
2 to select the desired Playlist/Artist/
Album/Genre/Composer.
•
•
•
If the song search mode was used to select a song, this function is
inactive.
If an album is selected during an artist search, other albums by that
artist are searchable.
This function is inactive during shuffle (
) playback.
24-EN
Repeat Play
Only Repeat One is available for the iPhone/iPod.
Repeat One:
A single song is repeatedly played back.
1
Press
4.
The song is played back repeatedly.
(off)
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
•
During repeat playback, no other songs are selectable by pressing
or
.
Displaying the Text
You can display the tag information of a song in the iPhone/iPod.
Press VIEW.
Each press changes the display.
•
When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
ALBUM NAME*
TRACK NO./ELAPSED TIME
ARTIST NAME*
SONG TITLE*
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
•
•
Only alphanumeric characters (ASCII) can be displayed.
If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64
(64 byte).
•
•
Some characters may not be correctly displayed.
“NO SUPPORT” is displayed if text information is not supported by
the unit.
25-EN
CD
Information
CD Player not functioning.
Out of operating temperature range +50°C (+120°F) for CD.
- Allow the vehicle’s interior (or trunk) temperature to cool.
•
In Case of Difficulty
CD playback sound is wavering.
•
Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
CD insertion not possible.
•
A CD is already in the CD player.
- Eject the CD and remove it.
Basic
•
The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
No function or display.
Vehicle’s ignition is off.
•
- If connected following instructions, the unit will not operate
with the vehicle’s ignition off.
Unable to fast forward or backward the CD.
•
The CD has been damaged.
•
•
Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
•
•
•
•
Improper mounting of the unit.
- Securely re-mount the unit.
The disc is very dirty.
- Clean the disc.
The disc has scratches.
- Change the disc.
The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
•
Radio
Unable to receive stations.
•
No antenna or open connection in cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
CD playback sound skips without vibration.
•
The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Unable to tune stations in the seek mode.
Error displays (built-in CD player only).
•
You are in a weak signal area.
•
Mechanical error.
- Make sure the tuner is in the DX mode.
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
•
If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
CD-R/CD-RW playback not possible.
•
•
Close session (finalisation) has not been performed.
- Perform finalisation and attempt playback again.
MP3/WMA/AAC
Broadcast is noisy.
•
The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
MP3, WMA or AAC is not played back.
•
Writing error occurred. The MP3/WMA/AAC format is not
•
compatible.
- Make sure the antenna is grounded properly at its mounting
location.
- Make sure the MP3/WMA/AAC has been written in a
supported format. Refer to “About MP3/WMA/AAC”
(pages 10-11), then rewrite in the format supported by this
device.
26-EN
Audio
Indication for USB memory
The sound is not output from the speakers.
•
Unit has no output signal of the internal amplifier.
- POWER IC is switched to “POW ON” (page 17).
•
Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
iPod
iPod does not play and no sound is output.
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
•
The iPod has not been recognised.
- Reset this unit and the iPod. Refer to “Initial System Start-Up”
(page 6). To reset the iPod, refer to the Owner’s Manual of the
iPod.
UNIT ERROR
Indication for CD Player
•
•
A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
•
•
No CD is inserted.
- Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
NO DEVICE
A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
•
•
•
•
No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
•
•
Mechanism error.
1) Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
(refer to page 6) and press
again.
If the disc still cannot be ejected, consult your Alpine dealer.
NO SUPPORT
Text information that is not recognizable by the unit has been input.
- Use a USB memory device with input text information that is
supported by the unit.
•
•
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
27-EN
Indication for iPod Mode
•
The iPhone/iPod is not connected.
- Make sure the iPhone/iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
•
•
There are no songs in the iPhone/iPod.
- Download songs to the iPhone/iPod and connect to this unit.
Communication error.
- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPhone/iPod
and this unit, using the iPhone/iPod cable.
•
Caused by the iPhone/iPod Software Version not being compatible with
this unit.
-
Update the iPhone/iPod Software Version to be compatible with
this unit.
•
•
The iPhone/iPod is not verified.
- Reset the iPod.
- Try another iPhone/iPod, if available.
Power surge error.
Excessive voltage/current is supplied to the iPhone/iPod.
- Try another iPhone/iPod, if available.
Bluetooth mode
•
The Bluetooth device is not connected.
- Connect the Bluetooth device.
Indication for all Modes
•
Malfunction occurred as a result of the speaker cable shorting on
the car chassis.
- Route the cable correctly, and set POWER IC to POW ON
(page 17).
If the above solution does not work, consult your nearest
dealer.
28-EN
GENERAL
Specifications
Power Requirement
14.4 V DC
(11-16 V allowable)
50 W × 4
FM TUNER SECTION
Maximum Power Output
Tuning Range
87.5-108.0 MHz
Maximum Pre-Output Voltage
2 V/10 k ohms
14 dB at 100 Hz
14 dB at 10 kHz
1.5 kg (3 lbs. 4 oz)
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
9.3 dBf (0.8 µV/75 ohms)
Bass
13.5 dBf (1.3 µV/75 ohms)
Treble
Weight
80 dB
65 dB
35 dB
2.0 dB
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
Capture Ratio
AM TUNER SECTION
161 mm (6-3/8")
Tuning Range
531-1,602 kHz
22.5 µV/27 dB
NOSEPIECE SIZE
Sensitivity (IEC Standard)
Width
Height
Depth
170 mm (6-3/4")
46 mm (1-13/16")
25 mm (1")
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
5-20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
•
Due to continuous product improvement, specifications and design
are subject to change without notice.
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
USB SECTION
USB requirements
Max. Power Consumption
USB Class
USB 1.1/2.0
500 mA
Mass Storage
File System
FAT 12/16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
Windows Media™ Audio
AAC-LC format “.m4a” file
2-Channel (Stereo)
5-20,000 Hz ( 1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
BLUETOOTH SECTION (CDE-103EBT Only)
Bluetooth Specification
Bluetooth V 2.0
Output Power
HFP
+4 dBm Max. (Power class 2)
(Hands-Free Profile)
(Head Set Profile)
HSP
29-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 to 5 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Precautions
Be sure to disconnect the cable from the (–) battery post before
installing your CDE-103EBT/CDE-102E/CDE-101E/
CDE-101EM. This will reduce any chance of damage to the unit
in case of a short-circuit.
•
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
•
•
Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the CDE-103EBT/CDE-102E/CDE-101E/
CDE-101EM to the fuse box, make sure the fuse for the intended
circuit of the CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM
has the appropriate amperage. Failure to do so may result in
damage to the unit and/or the vehicle. When in doubt, consult
your Alpine dealer.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
•
•
The CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM uses
female RCA-type jacks for connection to other units
(e.g. amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
IMPORTANT
SERIAL NUMBER:
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
30-EN
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
Installation
1
unit to a clean metal spot using a screw (* ) already
attached to the vehicle’s chassis.
2
•
For the screw marked “* ”, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier to
the corresponding output lead coming from the left
rear of the CDE-103EBT/CDE-102E/CDE-101E/
CDE-101EM. Connect all other leads of the
CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM
according to details described in the
Detachable Front
Panel
CONNECTlONS section.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
3
Slide the CDE-103EBT/CDE-102E/CDE-101E/
CDE-101EM into the dashboard until it clicks. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install
the detachable front panel.
•
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
Removal
1. Remove the detachable front panel.
2. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
Less than 35°
This unit
Bracket Keys
(Included)
Mounting Sleeve
(Included)
1
Dashboard
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Front Frame
Pressure Plates*
This unit
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Screws (M5 × 8)
(Included)
This unit
Ground Lead
Remove the mounting sleeve from the main unit (see
“Removal” on page 31).
3
*
2
Screw
Hex Nut (M5)
Mounting Bracket
2
*
Secure the ground lead of the unit to a clean metal spot using a screw
Bolt Stud
3
(* ) already attached to the vehicle’s chassis.
Metal
Mounting
Strap
Mounting the Microphone (CDE-103EBT
only)
1
*
This unit
For the sake of safety, mount the microphone in the following location.
Ground Lead
Chassis
•
•
•
In a stable and secure location.
In a location that does not inhibit safely driving the vehicle.
Mount the microphone in a location where the driver’s voice can
easily be picked up.
Choose a location for the microphone that can easily pick up the driver’s
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
31-EN
Connections
To iPhone/iPod
CDE-102E/CDE-101E/
CDE-101EM only
or
To Bluetooth INTERFACE (KCE-400BT)
(sold separately)
Antenna
Blue
Blue/White
Pink/Black
POWER ANT
To power antenna
To amplifier
REMOTE TURN-ON
AUDIO INTERRUPT IN
To vehicle phone
Orange
ILLUMINATION
To the instrument cluster illumination
lead
Red
IGNITION
BATTERY
Ignition Key
Yellow
Black
GND
Battery
Grey
Speakers
SPEAKER
RIGHT FRONT
Front Right
Grey/Black
Violet/Black
SPEAKER
RIGHT REAR
Rear Right
Rear Left
Violet
Green
SPEAKER
LEFT REAR
Green/Black
White/Black
SPEAKER
LEFT FRONT
Front Left
White
Speakers
Front Left
CDE-103EBT/CDE-102E only
Amplifier
Amplifier
Front Right
CDE-103EBT/
CDE-102E: Rear
1
or Subwoofers
*
CDE-101E/
CDE-101EM:
Front or
2
Subwoofers*
CDE-103EBT/CDE-102E only
1
2
*
*
When Subwoofer is OFF: Output is for Rear speakers. When Subwoofer is ON: Output is for Subwoofer.
When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 16.
32-EN
Antenna Receptacle
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Front Output RCA Connectors (CDE-103EBT/
CDE-102E only)
RED is right and WHITE is left.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Rear/Subwoofer Output RCA Connectors
(CDE-103EBT/CDE-102E only)
Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular
phone which provides ground shorting when a call is
received.
Front/Subwoofer Output RCA Connectors
(CDE-101E/CDE-101EM only)
RED is right and WHITE is left.
MIC Input Connector (CDE-103EBT only)
To Microphone.
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
this unit to dim whenever the vehicle’s lights are turned on.
RCA Extension Cable (sold separately)
Full Speed Connector
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Control iPhone/iPod signals.
Connect this to an iPhone/iPod by using FULL SPEED™
Connection Cable (KCE-433iV) (sold separately) or to an
external device (such as a portable player) by using
conversion cable (KCE-237B) for building up the AUX IN
(sold separately).
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
•
Refer to “Setting the AUX+ SETUP Mode” (page 17).
AUX+ ON :
When the external device is connected.
Ground Lead (Black)
AUX+ OFF : When an iPhone/iPod is connected.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
You can also connect this to an optional Bluetooth
INTERFACE (KCE-400BT) (CDE-102E/CDE-101E/CDE-
101EM only). To use a hands-free mobile phone, an optional
Bluetooth INTERFACE (KCE-400BT) connection is required.
For details on connection, refer to the Owner’s Manual of the
Bluetooth INTERFACE (KCE-400BT).
FULL SPEEDTM Connection Cable (KCE-433iV) (sold
separately)
Power Supply Connector
Right Front (+) Speaker Output Lead (Grey)
Right Front (–) Speaker Output Lead (Grey/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
KCE-400BT Connection Cable (Included with
KCE-400BT)
Front AUX Input Terminal (CDE-103EBT/CDE-102E
only)
This terminal allows for input of audio from an external
device (such as a portable player), using a commercially-
available converter cable.
USB Connection Terminal
Connect USB memory (sold separately)
To prevent external noise from entering the audio system.
•
•
•
•
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
33-EN
|